Skip to content

URL

batch#

action#

Name of the action that should create the output

admin/jqadm/url/batch/action =
  • Type: string - Name of the action
  • Since: 2022.10

In Model-View-Controller (MVC) applications, actions are the methods of a controller that create parts of the output displayed in the generated HTML page. Action names are usually alpha-numeric.

See also:

  • admin/jqadm/url/batch/target
  • admin/jqadm/url/batch/controller
  • admin/jqadm/url/batch/config
  • admin/jqadm/url/batch/filter

config#

Associative list of configuration options used for generating the URL

admin/jqadm/url/batch/config = Array
(
)

  • Default: Array ( )

  • Type: string - Associative list of configuration options

  • Since: 2022.10

You can specify additional options as key/value pairs used when generating the URLs, like

 admin/jqadm/url/batch/config = ['absoluteUri' => true]

The available key/value pairs depend on the application that embeds the e-commerce framework. This is because the infrastructure of the application is used for generating the URLs. The full list of available config options is referenced in the "see also" section of this page.

See also:

  • admin/jqadm/url/batch/target
  • admin/jqadm/url/batch/controller
  • admin/jqadm/url/batch/action
  • admin/jqadm/url/batch/filter

controller#

Name of the controller whose action should be called

admin/jqadm/url/batch/controller =
  • Type: string - Name of the controller
  • Since: 2022.10

In Model-View-Controller (MVC) applications, the controller contains the methods that create parts of the output displayed in the generated HTML page. Controller names are usually alpha-numeric.

See also:

  • admin/jqadm/url/batch/target
  • admin/jqadm/url/batch/action
  • admin/jqadm/url/batch/config
  • admin/jqadm/url/batch/filter

filter#

Removes parameters for the detail page before generating the URL

admin/jqadm/url/batch/filter = Array
(
)

  • Default: Array ( )

  • Type: array - List of parameter names to remove

  • Since: 2022.10

This setting removes the listed parameters from the URLs. Keep care to remove no required parameters!

See also:

  • admin/jqadm/url/batch/target
  • admin/jqadm/url/batch/controller
  • admin/jqadm/url/batch/action
  • admin/jqadm/url/batch/config

target#

Destination of the URL where the controller specified in the URL is known

admin/jqadm/url/batch/target =
  • Type: string - Destination of the URL
  • Since: 2022.10

The destination can be a page ID like in a content management system or the module of a software development framework. This "target" must contain or know the controller that should be called by the generated URL.

See also:

  • admin/jqadm/url/batch/controller
  • admin/jqadm/url/batch/action
  • admin/jqadm/url/batch/config
  • admin/jqadm/url/batch/filter

copy#

action#

Name of the action that should create the output

admin/jqadm/url/copy/action =
  • Type: string - Name of the action
  • Since: 2016.04

In Model-View-Controller (MVC) applications, actions are the methods of a controller that create parts of the output displayed in the generated HTML page. Action names are usually alpha-numeric.

See also:

  • admin/jqadm/url/copy/target
  • admin/jqadm/url/copy/controller
  • admin/jqadm/url/copy/config
  • admin/jqadm/url/copy/filter

config#

Associative list of configuration options used for generating the URL

admin/jqadm/url/copy/config = Array
(
)

  • Default: Array ( )

  • Type: string - Associative list of configuration options

  • Since: 2016.04

You can specify additional options as key/value pairs used when generating the URLs, like

 admin/jqadm/url/copy/config = ['absoluteUri' => true]

The available key/value pairs depend on the application that embeds the e-commerce framework. This is because the infrastructure of the application is used for generating the URLs. The full list of available config options is referenced in the "see also" section of this page.

See also:

  • admin/jqadm/url/copy/target
  • admin/jqadm/url/copy/controller
  • admin/jqadm/url/copy/action
  • admin/jqadm/url/copy/filter

controller#

Name of the controller whose action should be called

admin/jqadm/url/copy/controller =
  • Type: string - Name of the controller
  • Since: 2016.04

In Model-View-Controller (MVC) applications, the controller contains the methods that create parts of the output displayed in the generated HTML page. Controller names are usually alpha-numeric.

See also:

  • admin/jqadm/url/copy/target
  • admin/jqadm/url/copy/action
  • admin/jqadm/url/copy/config
  • admin/jqadm/url/copy/filter

filter#

Removes parameters for the detail page before generating the URL

admin/jqadm/url/copy/filter = Array
(
)

  • Default: Array ( )

  • Type: array - List of parameter names to remove

  • Since: 2016.04

This setting removes the listed parameters from the URLs. Keep care to remove no required parameters!

See also:

  • admin/jqadm/url/copy/target
  • admin/jqadm/url/copy/controller
  • admin/jqadm/url/copy/action
  • admin/jqadm/url/copy/config

target#

Destination of the URL where the controller specified in the URL is known

admin/jqadm/url/copy/target =
  • Type: string - Destination of the URL
  • Since: 2016.04

The destination can be a page ID like in a content management system or the module of a software development framework. This "target" must contain or know the controller that should be called by the generated URL.

See also:

  • admin/jqadm/url/copy/controller
  • admin/jqadm/url/copy/action
  • admin/jqadm/url/copy/config
  • admin/jqadm/url/copy/filter

create#

action#

Name of the action that should create the output

admin/jqadm/url/create/action =
  • Type: string - Name of the action
  • Since: 2016.04

In Model-View-Controller (MVC) applications, actions are the methods of a controller that create parts of the output displayed in the generated HTML page. Action names are usually alpha-numeric.

See also:

  • admin/jqadm/url/create/target
  • admin/jqadm/url/create/controller
  • admin/jqadm/url/create/config
  • admin/jqadm/url/create/filter

config#

Associative list of configuration options used for generating the URL

admin/jqadm/url/create/config = Array
(
)

  • Default: Array ( )

  • Type: string - Associative list of configuration options

  • Since: 2016.04

You can specify additional options as key/value pairs used when generating the URLs, like

 admin/jqadm/url/create/config = ['absoluteUri' => true]

The available key/value pairs depend on the application that embeds the e-commerce framework. This is because the infrastructure of the application is used for generating the URLs. The full list of available config options is referenced in the "see also" section of this page.

See also:

  • admin/jqadm/url/create/target
  • admin/jqadm/url/create/controller
  • admin/jqadm/url/create/action
  • admin/jqadm/url/create/filter

controller#

Name of the controller whose action should be called

admin/jqadm/url/create/controller =
  • Type: string - Name of the controller
  • Since: 2016.04

In Model-View-Controller (MVC) applications, the controller contains the methods that create parts of the output displayed in the generated HTML page. Controller names are usually alpha-numeric.

See also:

  • admin/jqadm/url/create/target
  • admin/jqadm/url/create/action
  • admin/jqadm/url/create/config
  • admin/jqadm/url/create/filter

filter#

Removes parameters for the detail page before generating the URL

admin/jqadm/url/create/filter = Array
(
)

  • Default: Array ( )

  • Type: array - List of parameter names to remove

  • Since: 2016.04

This setting removes the listed parameters from the URLs. Keep care to remove no required parameters!

See also:

  • admin/jqadm/url/create/target
  • admin/jqadm/url/create/controller
  • admin/jqadm/url/create/action
  • admin/jqadm/url/create/config

target#

Destination of the URL where the controller specified in the URL is known

admin/jqadm/url/create/target =
  • Type: string - Destination of the URL
  • Since: 2016.04

The destination can be a page ID like in a content management system or the module of a software development framework. This "target" must contain or know the controller that should be called by the generated URL.

See also:

  • admin/jqadm/url/create/controller
  • admin/jqadm/url/create/action
  • admin/jqadm/url/create/config
  • admin/jqadm/url/create/filter

delete#

action#

Name of the action that should create the output

admin/jqadm/url/delete/action =
  • Type: string - Name of the action
  • Since: 2016.04

In Model-View-Controller (MVC) applications, actions are the methods of a controller that create parts of the output displayed in the generated HTML page. Action names are usually alpha-numeric.

See also:

  • admin/jqadm/url/delete/target
  • admin/jqadm/url/delete/controller
  • admin/jqadm/url/delete/config
  • admin/jqadm/url/delete/filter

config#

Associative list of configuration options used for generating the URL

admin/jqadm/url/delete/config = Array
(
)

  • Default: Array ( )

  • Type: string - Associative list of configuration options

  • Since: 2016.04

You can specify additional options as key/value pairs used when generating the URLs, like

 admin/jqadm/url/delete/config = ['absoluteUri' => true]

The available key/value pairs depend on the application that embeds the e-commerce framework. This is because the infrastructure of the application is used for generating the URLs. The full list of available config options is referenced in the "see also" section of this page.

See also:

  • admin/jqadm/url/delete/target
  • admin/jqadm/url/delete/controller
  • admin/jqadm/url/delete/action
  • admin/jqadm/url/delete/filter

controller#

Name of the controller whose action should be called

admin/jqadm/url/delete/controller =
  • Type: string - Name of the controller
  • Since: 2016.04

In Model-View-Controller (MVC) applications, the controller contains the methods that create parts of the output displayed in the generated HTML page. Controller names are usually alpha-numeric.

See also:

  • admin/jqadm/url/delete/target
  • admin/jqadm/url/delete/action
  • admin/jqadm/url/delete/config
  • admin/jqadm/url/delete/filter

filter#

Removes parameters for the detail page before generating the URL

admin/jqadm/url/delete/filter = Array
(
)

  • Default: Array ( )

  • Type: array - List of parameter names to remove

  • Since: 2016.04

This setting removes the listed parameters from the URLs. Keep care to remove no required parameters!

See also:

  • admin/jqadm/url/delete/target
  • admin/jqadm/url/delete/controller
  • admin/jqadm/url/delete/action
  • admin/jqadm/url/delete/config

target#

Destination of the URL where the controller specified in the URL is known

admin/jqadm/url/delete/target =
  • Type: string - Destination of the URL
  • Since: 2016.04

The destination can be a page ID like in a content management system or the module of a software development framework. This "target" must contain or know the controller that should be called by the generated URL.

See also:

  • admin/jqadm/url/delete/controller
  • admin/jqadm/url/delete/action
  • admin/jqadm/url/delete/config
  • admin/jqadm/url/delete/filter

export#

action#

Name of the action that should create the output

admin/jqadm/url/export/action =
  • Type: string - Name of the action
  • Since: 2016.04

In Model-View-Controller (MVC) applications, actions are the methods of a controller that create parts of the output displayed in the generated HTML page. Action names are usually alpha-numeric.

See also:

  • admin/jqadm/url/export/target
  • admin/jqadm/url/export/controller
  • admin/jqadm/url/export/config

config#

Associative list of configuration options used for generating the URL

admin/jqadm/url/export/config = Array
(
)

  • Default: Array ( )

  • Type: string - Associative list of configuration options

  • Since: 2016.04

You can specify additional options as key/value pairs used when generating the URLs, like

 admin/jqadm/url/export/config = ['absoluteUri' => true )

The available key/value pairs depend on the application that embeds the e-commerce framework. This is because the infrastructure of the application is used for generating the URLs. The full list of available config options is referenced in the "see also" section of this page.

See also:

  • admin/jqadm/url/export/target
  • admin/jqadm/url/export/controller
  • admin/jqadm/url/export/action

controller#

Name of the controller whose action should be called

admin/jqadm/url/export/controller =
  • Type: string - Name of the controller
  • Since: 2016.04

In Model-View-Controller (MVC) applications, the controller contains the methods that create parts of the output displayed in the generated HTML page. Controller names are usually alpha-numeric.

See also:

  • admin/jqadm/url/export/target
  • admin/jqadm/url/export/action
  • admin/jqadm/url/export/config

filter#

Removes parameters for the detail page before generating the URL

admin/jqadm/url/export/filter = Array
(
)

  • Default: Array ( )

  • Type: array - List of parameter names to remove

  • Since: 2016.04

This setting removes the listed parameters from the URLs. Keep care to remove no required parameters!

See also:

  • admin/jqadm/url/export/target
  • admin/jqadm/url/export/controller
  • admin/jqadm/url/export/action
  • admin/jqadm/url/export/config

target#

Destination of the URL where the controller specified in the URL is known

admin/jqadm/url/export/target =
  • Type: string - Destination of the URL
  • Since: 2017.10

The destination can be a page ID like in a content management system or the module of a software development framework. This "target" must contain or know the controller that should be called by the generated URL.

See also:

  • admin/jqadm/url/export/controller
  • admin/jqadm/url/export/action
  • admin/jqadm/url/export/config

get#

action#

Name of the action that should create the output

admin/jqadm/url/get/action =
  • Type: string - Name of the action
  • Since: 2016.04

In Model-View-Controller (MVC) applications, actions are the methods of a controller that create parts of the output displayed in the generated HTML page. Action names are usually alpha-numeric.

See also:

  • admin/jqadm/url/get/target
  • admin/jqadm/url/get/controller
  • admin/jqadm/url/get/config
  • admin/jqadm/url/get/filter

config#

Associative list of configuration options used for generating the URL

admin/jqadm/url/get/config = Array
(
)

  • Default: Array ( )

  • Type: string - Associative list of configuration options

  • Since: 2016.04

You can specify additional options as key/value pairs used when generating the URLs, like

 admin/jqadm/url/get/config = ['absoluteUri' => true]

The available key/value pairs depend on the application that embeds the e-commerce framework. This is because the infrastructure of the application is used for generating the URLs. The full list of available config options is referenced in the "see also" section of this page.

See also:

  • admin/jqadm/url/get/target
  • admin/jqadm/url/get/controller
  • admin/jqadm/url/get/action
  • admin/jqadm/url/get/filter

controller#

Name of the controller whose action should be called

admin/jqadm/url/get/controller =
  • Type: string - Name of the controller
  • Since: 2016.04

In Model-View-Controller (MVC) applications, the controller contains the methods that create parts of the output displayed in the generated HTML page. Controller names are usually alpha-numeric.

See also:

  • admin/jqadm/url/get/target
  • admin/jqadm/url/get/action
  • admin/jqadm/url/get/config
  • admin/jqadm/url/get/filter

filter#

Removes parameters for the detail page before generating the URL

admin/jqadm/url/get/filter = Array
(
)

  • Default: Array ( )

  • Type: array - List of parameter names to remove

  • Since: 2016.04

This setting removes the listed parameters from the URLs. Keep care to remove no required parameters!

See also:

  • admin/jqadm/url/get/target
  • admin/jqadm/url/get/controller
  • admin/jqadm/url/get/action
  • admin/jqadm/url/get/config

target#

Destination of the URL where the controller specified in the URL is known

admin/jqadm/url/get/target =
  • Type: string - Destination of the URL
  • Since: 2016.04

The destination can be a page ID like in a content management system or the module of a software development framework. This "target" must contain or know the controller that should be called by the generated URL.

See also:

  • admin/jqadm/url/get/controller
  • admin/jqadm/url/get/action
  • admin/jqadm/url/get/config
  • admin/jqadm/url/get/filter

save#

action#

Name of the action that should create the output

admin/jqadm/url/save/action =
  • Type: string - Name of the action
  • Since: 2016.04

In Model-View-Controller (MVC) applications, actions are the methods of a controller that create parts of the output displayed in the generated HTML page. Action names are usually alpha-numeric.

See also:

  • admin/jqadm/url/save/target
  • admin/jqadm/url/save/controller
  • admin/jqadm/url/save/config

config#

Associative list of configuration options used for generating the URL

admin/jqadm/url/save/config = Array
(
)

  • Default: Array ( )

  • Type: string - Associative list of configuration options

  • Since: 2016.04

You can specify additional options as key/value pairs used when generating the URLs, like

 admin/jqadm/url/save/config = array( 'absoluteUri' => true )

The available key/value pairs depend on the application that embeds the e-commerce framework. This is because the infrastructure of the application is used for generating the URLs. The full list of available config options is referenced in the "see also" section of this page.

See also:

  • admin/jqadm/url/save/target
  • admin/jqadm/url/save/controller
  • admin/jqadm/url/save/action

controller#

Name of the controller whose action should be called

admin/jqadm/url/save/controller =
  • Type: string - Name of the controller
  • Since: 2016.04

In Model-View-Controller (MVC) applications, the controller contains the methods that create parts of the output displayed in the generated HTML page. Controller names are usually alpha-numeric.

See also:

  • admin/jqadm/url/save/target
  • admin/jqadm/url/save/action
  • admin/jqadm/url/save/config

filter#

Removes parameters for the detail page before generating the URL

admin/jqadm/url/save/filter = Array
(
)

  • Default: Array ( )

  • Type: array - List of parameter names to remove

  • Since: 2022.10

This setting removes the listed parameters from the URLs. Keep care to remove no required parameters!

See also:

  • admin/jqadm/url/save/target
  • admin/jqadm/url/save/controller
  • admin/jqadm/url/save/action
  • admin/jqadm/url/save/config

target#

Destination of the URL where the controller specified in the URL is known

admin/jqadm/url/save/target =
  • Type: string - Destination of the URL
  • Since: 2016.04

The destination can be a page ID like in a content management system or the module of a software development framework. This "target" must contain or know the controller that should be called by the generated URL.

See also:

  • admin/jqadm/url/save/controller
  • admin/jqadm/url/save/action
  • admin/jqadm/url/save/config

action#

Name of the action that should create the output

admin/jqadm/url/search/action =
  • Type: string - Name of the action
  • Since: 2016.04

In Model-View-Controller (MVC) applications, actions are the methods of a controller that create parts of the output displayed in the generated HTML page. Action names are usually alpha-numeric.

See also:

  • admin/jqadm/url/search/target
  • admin/jqadm/url/search/controller
  • admin/jqadm/url/search/config
  • admin/jqadm/url/search/filter

config#

Associative list of configuration options used for generating the URL

admin/jqadm/url/search/config = Array
(
)

  • Default: Array ( )

  • Type: string - Associative list of configuration options

  • Since: 2016.04

You can specify additional options as key/value pairs used when generating the URLs, like

 admin/jqadm/url/search/config = ['absoluteUri' => true )

The available key/value pairs depend on the application that embeds the e-commerce framework. This is because the infrastructure of the application is used for generating the URLs. The full list of available config options is referenced in the "see also" section of this page.

See also:

  • admin/jqadm/url/search/target
  • admin/jqadm/url/search/controller
  • admin/jqadm/url/search/action
  • admin/jqadm/url/search/filter

controller#

Name of the controller whose action should be called

admin/jqadm/url/search/controller =
  • Type: string - Name of the controller
  • Since: 2016.04

In Model-View-Controller (MVC) applications, the controller contains the methods that create parts of the output displayed in the generated HTML page. Controller names are usually alpha-numeric.

See also:

  • admin/jqadm/url/search/target
  • admin/jqadm/url/search/action
  • admin/jqadm/url/search/config
  • admin/jqadm/url/search/filter

filter#

Removes parameters for the detail page before generating the URL

admin/jqadm/url/search/filter = Array
(
)

  • Default: Array ( )

  • Type: array - List of parameter names to remove

  • Since: 2016.04

This setting removes the listed parameters from the URLs. Keep care to remove no required parameters!

See also:

  • admin/jqadm/url/search/target
  • admin/jqadm/url/search/controller
  • admin/jqadm/url/search/action
  • admin/jqadm/url/search/config

target#

Destination of the URL where the controller specified in the URL is known

admin/jqadm/url/search/target =
  • Type: string - Destination of the URL
  • Since: 2016.04

The destination can be a page ID like in a content management system or the module of a software development framework. This "target" must contain or know the controller that should be called by the generated URL.

See also:

  • admin/jqadm/url/search/controller
  • admin/jqadm/url/search/action
  • admin/jqadm/url/search/config
  • admin/jqadm/url/search/filter

Comments

Become an Aimeos Partner

Aimeos partners are first-class specialists in creating or hosting your Aimeos e-commerce project. They have proven their expertise by building top level e-commerce applications using Aimeos.

Our partners