Skip to content

Coupon

code#

decorators/excludes#

Excludes decorators added by the "common" option from the coupon code manager

mshop/coupon/manager/code/decorators/excludes = Array
(
)
  • Default: Array
  • Type: array - Address of decorator names
  • Since: 2014.03

Decorators extend the functionality of a class by adding new aspects (e.g. log what is currently done), executing the methods of the underlying class only in certain conditions (e.g. only for logged in users) or modify what is returned to the caller.

This option allows you to remove a decorator added via "mshop/common/manager/decorators/default" before they are wrapped around the coupon code manager.

 mshop/coupon/manager/code/decorators/excludes = array( 'decorator1' )

This would remove the decorator named "decorator1" from the list of common decorators ("\Aimeos\MShop\Common\Manager\Decorator*") added via "mshop/common/manager/decorators/default" for the coupon code manager.

See also:

  • mshop/common/manager/decorators/default
  • mshop/coupon/manager/code/decorators/global
  • mshop/coupon/manager/code/decorators/local

decorators/global#

Adds a list of globally available decorators only to the coupon code manager

mshop/coupon/manager/code/decorators/global = Array
(
)
  • Default: Array
  • Type: array - Address of decorator names
  • Since: 2014.03

Decorators extend the functionality of a class by adding new aspects (e.g. log what is currently done), executing the methods of the underlying class only in certain conditions (e.g. only for logged in users) or modify what is returned to the caller.

This option allows you to wrap global decorators ("\Aimeos\MShop\Common\Manager\Decorator*") around the coupon code manager.

 mshop/coupon/manager/code/decorators/global = array( 'decorator1' )

This would add the decorator named "decorator1" defined by "\Aimeos\MShop\Common\Manager\Decorator\Decorator1" only to the coupon code manager.

See also:

  • mshop/common/manager/decorators/default
  • mshop/coupon/manager/code/decorators/excludes
  • mshop/coupon/manager/code/decorators/local

decorators/local#

Adds a list of local decorators only to the coupon code manager

mshop/coupon/manager/code/decorators/local = Array
(
)
  • Default: Array
  • Type: array - Address of decorator names
  • Since: 2014.03

Decorators extend the functionality of a class by adding new aspects (e.g. log what is currently done), executing the methods of the underlying class only in certain conditions (e.g. only for logged in users) or modify what is returned to the caller.

This option allows you to wrap local decorators ("\Aimeos\MShop\Coupon\Manager\Code\Decorator*") around the coupon code manager.

 mshop/coupon/manager/code/decorators/local = array( 'decorator2' )

This would add the decorator named "decorator2" defined by "\Aimeos\MShop\Coupon\Manager\Code\Decorator\Decorator2" only to the coupon code manager.

See also:

  • mshop/common/manager/decorators/default
  • mshop/coupon/manager/code/decorators/excludes
  • mshop/coupon/manager/code/decorators/global

name#

Class name of the used coupon code manager implementation

mshop/coupon/manager/code/name = Standard
  • Default: Standard
  • Type: string - Last part of the class name
  • Since: 2014.03

Each default coupon code manager can be replaced by an alternative imlementation. To use this implementation, you have to set the last part of the class name as configuration value so the manager factory knows which class it has to instantiate.

For example, if the name of the default class is

 \Aimeos\MShop\Coupon\Manager\Address\Standard

and you want to replace it with your own version named

 \Aimeos\MShop\Coupon\Manager\Address\Mycode

then you have to set the this configuration option:

 mshop/coupon/manager/code/name = Mycode

The value is the last part of your own class name and it's case sensitive, so take care that the configuration value is exactly named like the last part of the class name.

The allowed characters of the class name are A-Z, a-z and 0-9. No other characters are possible! You should always start the last part of the class name with an upper case character and continue only with lower case characters or numbers. Avoid chamel case names like "MyAddress"!

standard/count/ansi#

Counts the number of records matched by the given criteria in the database

mshop/coupon/manager/code/standard/count/ansi = 
 SELECT COUNT(*) AS "count"
 FROM (
    SELECT mcouco."id"
    FROM "mshop_coupon_code" AS mcouco
    :joins
    WHERE :cond
    ORDER BY mcouco."id"
    OFFSET 0 ROWS FETCH NEXT 10000 ROWS ONLY
 ) AS list
  • Default: mshop/coupon/manager/code/standard/count
  • Type: string - SQL statement for counting items
  • Since: 2014.03

Counts all records matched by the given criteria from the coupon database. The records must be from one of the sites that are configured via the context item. If the current site is part of a tree of sites, the statement can count all records from the current site and the complete sub-tree of sites.

As the records can normally be limited by criteria from sub-managers, their tables must be joined in the SQL context. This is done by using the "internaldeps" property from the definition of the ID column of the sub-managers. These internal dependencies specify the JOIN between the tables and the used columns for joining. The ":joins" placeholder is then replaced by the JOIN strings from the sub-managers.

To limit the records matched, conditions can be added to the given criteria object. It can contain comparisons like column names that must match specific values which can be combined by AND, OR or NOT operators. The resulting string of SQL conditions replaces the ":cond" placeholder before the statement is sent to the database server.

Both, the strings for ":joins" and for ":cond" are the same as for the "search" SQL statement.

Contrary to the "search" statement, it doesn't return any records but instead the number of records that have been found. As counting thousands of records can be a long running task, the maximum number of counted records is limited for performance reasons.

The SQL statement should conform to the ANSI standard to be compatible with most relational database systems. This also includes using double quotes for table and column names.

See also:

  • mshop/coupon/manager/code/standard/insert/ansi
  • mshop/coupon/manager/code/standard/update/ansi
  • mshop/coupon/manager/code/standard/newid/ansi
  • mshop/coupon/manager/code/standard/delete/ansi
  • mshop/coupon/manager/code/standard/search/ansi
  • mshop/coupon/manager/code/standard/counter/ansi

standard/count/mysql#

Counts the number of records matched by the given criteria in the database

mshop/coupon/manager/code/standard/count/mysql = 
 SELECT COUNT(*) AS "count"
 FROM (
    SELECT mcouco."id"
    FROM "mshop_coupon_code" AS mcouco
    :joins
    WHERE :cond
    ORDER BY mcouco."id"
    LIMIT 10000 OFFSET 0
 ) AS list
  • Default: SELECT COUNT(*) AS "count" FROM ( SELECT mcouco."id" FROM "mshop_coupon_code" AS mcouco :joins WHERE :cond ORDER BY mcouco."id" OFFSET 0 ROWS FETCH NEXT 10000 ROWS ONLY ) AS list

See also:

  • mshop/coupon/manager/code/standard/count/ansi

standard/counter/ansi#

Increases or decreases the counter of the coupon code record matched by the given code

mshop/coupon/manager/code/standard/counter/ansi = 
 UPDATE "mshop_coupon_code"
 SET    "count" = "count" + ?, "mtime" = ?, "editor" = ?
 WHERE :cond AND "code" = ?
  • Default: mshop/coupon/manager/code/standard/counter
  • Type: string - SQL statement for increasing/decreasing the coupon code count
  • Since: 2014.03

A counter is associated to each coupon code and it's decreased each time by one if a code used in an paid order was redeemed successfully. Shop owners can also use the coupon code counter to use the same code more often by setting it to an arbitrary value. In this case, the code can be redeemed until the counter reaches zero.

The coupon codes must be from one of the sites that are configured via the context item. If the current site is part of a tree of sites, the statement can increase or decrease codes from the current site and all parent sites if the code is inherited by one of the parent sites.

Each time the code is updated, the modify date/time is set to the current timestamp and the editor field is updated.

See also:

  • mshop/coupon/manager/code/standard/insert/ansi
  • mshop/coupon/manager/code/standard/update/ansi
  • mshop/coupon/manager/code/standard/newid/ansi
  • mshop/coupon/manager/code/standard/delete/ansi
  • mshop/coupon/manager/code/standard/search/ansi
  • mshop/coupon/manager/code/standard/count/ansi

standard/counter/mysql#

Increases or decreases the counter of the coupon code record matched by the given code

mshop/coupon/manager/code/standard/counter/mysql = 
 UPDATE "mshop_coupon_code"
 SET    "count" = "count" + ?, "mtime" = ?, "editor" = ?
 WHERE :cond AND "code" = ?
  • Default: UPDATE "mshop_coupon_code" SET "count" = "count" + ?, "mtime" = ?, "editor" = ? WHERE :cond AND "code" = ?

See also:

  • mshop/coupon/manager/code/standard/counter/ansi

standard/delete/ansi#

Deletes the items matched by the given IDs from the database

mshop/coupon/manager/code/standard/delete/ansi = 
 DELETE FROM "mshop_coupon_code"
 WHERE :cond AND siteid = ?
  • Default: mshop/coupon/manager/code/standard/delete
  • Type: string - SQL statement for deleting items
  • Since: 2014.03

Removes the records specified by the given IDs from the coupon database. The records must be from the site that is configured via the context item.

The ":cond" placeholder is replaced by the name of the ID column and the given ID or list of IDs while the site ID is bound to the question mark.

The SQL statement should conform to the ANSI standard to be compatible with most relational database systems. This also includes using double quotes for table and column names.

See also:

  • mshop/coupon/manager/code/standard/insert/ansi
  • mshop/coupon/manager/code/standard/update/ansi
  • mshop/coupon/manager/code/standard/newid/ansi
  • mshop/coupon/manager/code/standard/search/ansi
  • mshop/coupon/manager/code/standard/count/ansi
  • mshop/coupon/manager/code/standard/counter/ansi

standard/delete/mysql#

Deletes the items matched by the given IDs from the database

mshop/coupon/manager/code/standard/delete/mysql = 
 DELETE FROM "mshop_coupon_code"
 WHERE :cond AND siteid = ?
  • Default: DELETE FROM "mshop_coupon_code" WHERE :cond AND siteid = ?

See also:

  • mshop/coupon/manager/code/standard/delete/ansi

standard/insert/ansi#

Inserts a new coupon code record into the database table

mshop/coupon/manager/code/standard/insert/ansi = 
 INSERT INTO "mshop_coupon_code" ( :names
    "parentid", "code", "start", "end", "count", "ref",
    "mtime", "editor", "siteid", "ctime"
 ) VALUES ( :values
    ?, ?, ?, ?, ?, ?, ?, ?, ?, ?
 )
  • Default: mshop/coupon/manager/code/standard/insert
  • Type: string - SQL statement for inserting records
  • Since: 2014.03

Items with no ID yet (i.e. the ID is NULL) will be created in the database and the newly created ID retrieved afterwards using the "newid" SQL statement.

The SQL statement must be a string suitable for being used as prepared statement. It must include question marks for binding the values from the coupon item to the statement before they are sent to the database server. The number of question marks must be the same as the number of columns listed in the INSERT statement. The order of the columns must correspond to the order in the saveItems() method, so the correct values are bound to the columns.

The SQL statement should conform to the ANSI standard to be compatible with most relational database systems. This also includes using double quotes for table and column names.

See also:

  • mshop/coupon/manager/code/standard/update/ansi
  • mshop/coupon/manager/code/standard/newid/ansi
  • mshop/coupon/manager/code/standard/delete/ansi
  • mshop/coupon/manager/code/standard/search/ansi
  • mshop/coupon/manager/code/standard/count/ansi
  • mshop/coupon/manager/code/standard/counter/ansi

standard/insert/mysql#

Inserts a new coupon code record into the database table

mshop/coupon/manager/code/standard/insert/mysql = 
 INSERT INTO "mshop_coupon_code" ( :names
    "parentid", "code", "start", "end", "count", "ref",
    "mtime", "editor", "siteid", "ctime"
 ) VALUES ( :values
    ?, ?, ?, ?, ?, ?, ?, ?, ?, ?
 )
  • Default: INSERT INTO "mshop_coupon_code" ( :names "parentid", "code", "start", "end", "count", "ref", "mtime", "editor", "siteid", "ctime" ) VALUES ( :values ?, ?, ?, ?, ?, ?, ?, ?, ?, ? )

See also:

  • mshop/coupon/manager/code/standard/insert/ansi

standard/newid/ansi#

Retrieves the ID generated by the database when inserting a new record

mshop/coupon/manager/code/standard/newid/ansi = mshop/coupon/manager/code/standard/newid
  • Default: mshop/coupon/manager/code/standard/newid
  • Type: string - SQL statement for retrieving the last inserted record ID
  • Since: 2014.03

As soon as a new record is inserted into the database table, the database server generates a new and unique identifier for that record. This ID can be used for retrieving, updating and deleting that specific record from the table again.

For MySQL:

 SELECT LAST_INSERT_ID()
For PostgreSQL:
 SELECT currval('seq_mcouco_id')
For SQL Server:
 SELECT SCOPE_IDENTITY()
For Oracle:
 SELECT "seq_mcouco_id".CURRVAL FROM DUAL

There's no way to retrive the new ID by a SQL statements that fits for most database servers as they implement their own specific way.

See also:

  • mshop/coupon/manager/code/standard/insert/ansi
  • mshop/coupon/manager/code/standard/update/ansi
  • mshop/coupon/manager/code/standard/delete/ansi
  • mshop/coupon/manager/code/standard/search/ansi
  • mshop/coupon/manager/code/standard/count/ansi
  • mshop/coupon/manager/code/standard/counter/ansi

standard/newid/mysql#

Retrieves the ID generated by the database when inserting a new record

mshop/coupon/manager/code/standard/newid/mysql = SELECT LAST_INSERT_ID()
  • Default: mshop/coupon/manager/code/standard/newid

See also:

  • mshop/coupon/manager/code/standard/newid/ansi

standard/search/ansi#

Retrieves the records matched by the given criteria in the database

mshop/coupon/manager/code/standard/search/ansi = 
 SELECT :columns
    mcouco."id" AS "coupon.code.id", mcouco."parentid" AS "coupon.code.parentid",
    mcouco."siteid" AS "coupon.code.siteid", mcouco."code" AS "coupon.code.code",
    mcouco."start" AS "coupon.code.datestart", mcouco."end" AS "coupon.code.dateend",
    mcouco."count" AS "coupon.code.count", mcouco."ref" AS "coupon.code.ref",
    mcouco."mtime" AS "coupon.code.mtime", mcouco."ctime" AS "coupon.code.ctime",
    mcouco."editor" AS "coupon.code.editor"
 FROM "mshop_coupon_code" AS mcouco
 :joins
 WHERE :cond
 ORDER BY :order
 OFFSET :start ROWS FETCH NEXT :size ROWS ONLY
  • Default: mshop/coupon/manager/code/standard/search
  • Type: string - SQL statement for searching items
  • Since: 2014.03

Fetches the records matched by the given criteria from the coupon database. The records must be from one of the sites that are configured via the context item. If the current site is part of a tree of sites, the SELECT statement can retrieve all records from the current site and the complete sub-tree of sites.

As the records can normally be limited by criteria from sub-managers, their tables must be joined in the SQL context. This is done by using the "internaldeps" property from the definition of the ID column of the sub-managers. These internal dependencies specify the JOIN between the tables and the used columns for joining. The ":joins" placeholder is then replaced by the JOIN strings from the sub-managers.

To limit the records matched, conditions can be added to the given criteria object. It can contain comparisons like column names that must match specific values which can be combined by AND, OR or NOT operators. The resulting string of SQL conditions replaces the ":cond" placeholder before the statement is sent to the database server.

If the records that are retrieved should be ordered by one or more columns, the generated string of column / sort direction pairs replaces the ":order" placeholder. In case no ordering is required, the complete ORDER BY part including the "/-orderby/.../orderby-/" markers is removed to speed up retrieving the records. Columns of sub-managers can also be used for ordering the result set but then no index can be used.

The number of returned records can be limited and can start at any number between the begining and the end of the result set. For that the ":size" and ":start" placeholders are replaced by the corresponding values from the criteria object. The default values are 0 for the start and 100 for the size value.

The SQL statement should conform to the ANSI standard to be compatible with most relational database systems. This also includes using double quotes for table and column names.

See also:

  • mshop/coupon/manager/code/standard/insert/ansi
  • mshop/coupon/manager/code/standard/update/ansi
  • mshop/coupon/manager/code/standard/newid/ansi
  • mshop/coupon/manager/code/standard/delete/ansi
  • mshop/coupon/manager/code/standard/count/ansi
  • mshop/coupon/manager/code/standard/counter/ansi

standard/search/mysql#

Retrieves the records matched by the given criteria in the database

mshop/coupon/manager/code/standard/search/mysql = 
 SELECT :columns
    mcouco."id" AS "coupon.code.id", mcouco."parentid" AS "coupon.code.parentid",
    mcouco."siteid" AS "coupon.code.siteid", mcouco."code" AS "coupon.code.code",
    mcouco."start" AS "coupon.code.datestart", mcouco."end" AS "coupon.code.dateend",
    mcouco."count" AS "coupon.code.count", mcouco."ref" AS "coupon.code.ref",
    mcouco."mtime" AS "coupon.code.mtime", mcouco."ctime" AS "coupon.code.ctime",
    mcouco."editor" AS "coupon.code.editor"
 FROM "mshop_coupon_code" AS mcouco
 :joins
 WHERE :cond
 ORDER BY :order
 LIMIT :size OFFSET :start
  • Default: SELECT :columns mcouco."id" AS "coupon.code.id", mcouco."parentid" AS "coupon.code.parentid", mcouco."siteid" AS "coupon.code.siteid", mcouco."code" AS "coupon.code.code", mcouco."start" AS "coupon.code.datestart", mcouco."end" AS "coupon.code.dateend", mcouco."count" AS "coupon.code.count", mcouco."ref" AS "coupon.code.ref", mcouco."mtime" AS "coupon.code.mtime", mcouco."ctime" AS "coupon.code.ctime", mcouco."editor" AS "coupon.code.editor" FROM "mshop_coupon_code" AS mcouco :joins WHERE :cond ORDER BY :order OFFSET :start ROWS FETCH NEXT :size ROWS ONLY

See also:

  • mshop/coupon/manager/code/standard/search/ansi

standard/update/ansi#

Updates an existing coupon code record in the database

mshop/coupon/manager/code/standard/update/ansi = 
 UPDATE "mshop_coupon_code"
 SET :names
    "parentid" = ?, "code" = ?, "start" = ?, "end" = ?,
    "count" = ?, "ref" = ?, "mtime" = ?, "editor" = ?
 WHERE "siteid" = ? AND "id" = ?
  • Default: mshop/coupon/manager/code/standard/update
  • Type: string - SQL statement for updating records
  • Since: 2014.03

Items which already have an ID (i.e. the ID is not NULL) will be updated in the database.

The SQL statement must be a string suitable for being used as prepared statement. It must include question marks for binding the values from the coupon item to the statement before they are sent to the database server. The order of the columns must correspond to the order in the saveItems() method, so the correct values are bound to the columns.

The SQL statement should conform to the ANSI standard to be compatible with most relational database systems. This also includes using double quotes for table and column names.

See also:

  • mshop/coupon/manager/code/standard/insert/ansi
  • mshop/coupon/manager/code/standard/newid/ansi
  • mshop/coupon/manager/code/standard/delete/ansi
  • mshop/coupon/manager/code/standard/search/ansi
  • mshop/coupon/manager/code/standard/count/ansi
  • mshop/coupon/manager/code/standard/counter/ansi

standard/update/mysql#

Updates an existing coupon code record in the database

mshop/coupon/manager/code/standard/update/mysql = 
 UPDATE "mshop_coupon_code"
 SET :names
    "parentid" = ?, "code" = ?, "start" = ?, "end" = ?,
    "count" = ?, "ref" = ?, "mtime" = ?, "editor" = ?
 WHERE "siteid" = ? AND "id" = ?
  • Default: UPDATE "mshop_coupon_code" SET :names "parentid" = ?, "code" = ?, "start" = ?, "end" = ?, "count" = ?, "ref" = ?, "mtime" = ?, "editor" = ? WHERE "siteid" = ? AND "id" = ?

See also:

  • mshop/coupon/manager/code/standard/update/ansi

submanagers#

List of manager names that can be instantiated by the coupon code manager

mshop/coupon/manager/code/submanagers = Array
(
)
  • Default: Array
  • Type: array - List of sub-manager names
  • Since: 2014.03

Managers provide a generic interface to the underlying storage. Each manager has or can have sub-managers caring about particular aspects. Each of these sub-managers can be instantiated by its parent manager using the getSubManager() method.

The search keys from sub-managers can be normally used in the manager as well. It allows you to search for items of the manager using the search keys of the sub-managers to further limit the retrieved list of items.

decorators#

excludes#

Excludes decorators added by the "common" option from the coupon manager

mshop/coupon/manager/decorators/excludes = Array
(
)
  • Default: Array
  • Type: array - List of decorator names
  • Since: 2014.03

Decorators extend the functionality of a class by adding new aspects (e.g. log what is currently done), executing the methods of the underlying class only in certain conditions (e.g. only for logged in users) or modify what is returned to the caller.

This option allows you to remove a decorator added via "mshop/common/manager/decorators/default" before they are wrapped around the coupon manager.

 mshop/coupon/manager/decorators/excludes = array( 'decorator1' )

This would remove the decorator named "decorator1" from the list of common decorators ("\Aimeos\MShop\Common\Manager\Decorator*") added via "mshop/common/manager/decorators/default" for the coupon manager.

See also:

  • mshop/common/manager/decorators/default
  • mshop/coupon/manager/decorators/global
  • mshop/coupon/manager/decorators/local

global#

Adds a list of globally available decorators only to the coupon manager

mshop/coupon/manager/decorators/global = Array
(
)
  • Default: Array
  • Type: array - List of decorator names
  • Since: 2014.03

Decorators extend the functionality of a class by adding new aspects (e.g. log what is currently done), executing the methods of the underlying class only in certain conditions (e.g. only for logged in users) or modify what is returned to the caller.

This option allows you to wrap global decorators ("\Aimeos\MShop\Common\Manager\Decorator*") around the coupon code manager.

 mshop/coupon/manager/decorators/global = array( 'decorator1' )

This would add the decorator named "decorator1" defined by "\Aimeos\MShop\Common\Manager\Decorator\Decorator1" only to the coupon code manager.

See also:

  • mshop/common/manager/decorators/default
  • mshop/coupon/manager/decorators/excludes
  • mshop/coupon/manager/decorators/local

local#

Adds a list of local decorators only to the coupon manager

mshop/coupon/manager/decorators/local = Array
(
)
  • Default: Array
  • Type: array - List of decorator names
  • Since: 2014.03

Decorators extend the functionality of a class by adding new aspects (e.g. log what is currently done), executing the methods of the underlying class only in certain conditions (e.g. only for logged in users) or modify what is returned to the caller.

This option allows you to wrap local decorators ("\Aimeos\MShop\Coupon\Manager\Decorator*") around the coupon manager.

 mshop/coupon/manager/decorators/local = array( 'decorator2' )

This would add the decorator named "decorator2" defined by "\Aimeos\MShop\Coupon\Manager\Decorator\Decorator2" only to the coupon code manager.

See also:

  • mshop/common/manager/decorators/default
  • mshop/coupon/manager/decorators/excludes
  • mshop/coupon/manager/decorators/global

name#

Class name of the used coupon manager implementation

mshop/coupon/manager/name = Standard
  • Default: Standard
  • Type: string - Last part of the class name
  • Since: 2014.03

Each default manager can be replace by an alternative imlementation. To use this implementation, you have to set the last part of the class name as configuration value so the manager factory knows which class it has to instantiate.

For example, if the name of the default class is

 \Aimeos\MShop\Coupon\Manager\Standard

and you want to replace it with your own version named

 \Aimeos\MShop\Coupon\Manager\Mymanager

then you have to set the this configuration option:

 mshop/coupon/manager/name = Mymanager

The value is the last part of your own class name and it's case sensitive, so take care that the configuration value is exactly named like the last part of the class name.

The allowed characters of the class name are A-Z, a-z and 0-9. No other characters are possible! You should always start the last part of the class name with an upper case character and continue only with lower case characters or numbers. Avoid chamel case names like "MyManager"!

sitemode#

Mode how items from levels below or above in the site tree are handled

mshop/coupon/manager/sitemode = 1
  • Default: 1
  • Type: int - Constant from Aimeos\MShop\Locale\Manager\Base class
  • Since: 2018.01

By default, only items from the current site are fetched from the storage. If the ai-sites extension is installed, you can create a tree of sites. Then, this setting allows you to define for the whole coupon domain if items from parent sites are inherited, sites from child sites are aggregated or both.

Available constants for the site mode are: * 0 = only items from the current site * 1 = inherit items from parent sites * 2 = aggregate items from child sites * 3 = inherit and aggregate items at the same time

You also need to set the mode in the locale manager (mshop/locale/manager/standard/sitelevel) to one of the constants. If you set it to the same value, it will work as described but you can also use different modes. For example, if inheritance and aggregation is configured the locale manager but only inheritance in the domain manager because aggregating items makes no sense in this domain, then items wil be only inherited. Thus, you have full control over inheritance and aggregation in each domain.

See also:

  • mshop/locale/manager/standard/sitelevel

standard#

count/ansi#

Counts the number of records matched by the given criteria in the database

mshop/coupon/manager/standard/count/ansi = 
 SELECT COUNT(*) AS "count"
 FROM (
    SELECT mcou."id"
    FROM "mshop_coupon" AS mcou
    :joins
    WHERE :cond
    GROUP BY mcou."id"
    ORDER BY mcou."id"
    OFFSET 0 ROWS FETCH NEXT 10000 ROWS ONLY
 ) AS list
  • Default: mshop/coupon/manager/standard/count
  • Type: string - SQL statement for counting items
  • Since: 2014.03

Counts all records matched by the given criteria from the coupon database. The records must be from one of the sites that are configured via the context item. If the current site is part of a tree of sites, the statement can count all records from the current site and the complete sub-tree of sites.

As the records can normally be limited by criteria from sub-managers, their tables must be joined in the SQL context. This is done by using the "internaldeps" property from the definition of the ID column of the sub-managers. These internal dependencies specify the JOIN between the tables and the used columns for joining. The ":joins" placeholder is then replaced by the JOIN strings from the sub-managers.

To limit the records matched, conditions can be added to the given criteria object. It can contain comparisons like column names that must match specific values which can be combined by AND, OR or NOT operators. The resulting string of SQL conditions replaces the ":cond" placeholder before the statement is sent to the database server.

Both, the strings for ":joins" and for ":cond" are the same as for the "search" SQL statement.

Contrary to the "search" statement, it doesn't return any records but instead the number of records that have been found. As counting thousands of records can be a long running task, the maximum number of counted records is limited for performance reasons.

The SQL statement should conform to the ANSI standard to be compatible with most relational database systems. This also includes using double quotes for table and column names.

See also:

  • mshop/coupon/manager/standard/insert/ansi
  • mshop/coupon/manager/standard/update/ansi
  • mshop/coupon/manager/standard/newid/ansi
  • mshop/coupon/manager/standard/delete/ansi
  • mshop/coupon/manager/standard/search/ansi

count/mysql#

Counts the number of records matched by the given criteria in the database

mshop/coupon/manager/standard/count/mysql = 
 SELECT COUNT(*) AS "count"
 FROM (
    SELECT mcou."id"
    FROM "mshop_coupon" AS mcou
    :joins
    WHERE :cond
    GROUP BY mcou."id"
    ORDER BY mcou."id"
    LIMIT 10000 OFFSET 0
 ) AS list
  • Default: SELECT COUNT(*) AS "count" FROM ( SELECT mcou."id" FROM "mshop_coupon" AS mcou :joins WHERE :cond GROUP BY mcou."id" ORDER BY mcou."id" OFFSET 0 ROWS FETCH NEXT 10000 ROWS ONLY ) AS list

See also:

  • mshop/coupon/manager/standard/count/ansi

delete/ansi#

Deletes the items matched by the given IDs from the database

mshop/coupon/manager/standard/delete/ansi = 
 DELETE FROM "mshop_coupon"
 WHERE :cond AND siteid = ?
  • Default: mshop/coupon/manager/standard/delete
  • Type: string - SQL statement for deleting items
  • Since: 2014.03

Removes the records specified by the given IDs from the coupon database. The records must be from the site that is configured via the context item.

The ":cond" placeholder is replaced by the name of the ID column and the given ID or list of IDs while the site ID is bound to the question mark.

The SQL statement should conform to the ANSI standard to be compatible with most relational database systems. This also includes using double quotes for table and column names.

See also:

  • mshop/coupon/manager/standard/insert/ansi
  • mshop/coupon/manager/standard/update/ansi
  • mshop/coupon/manager/standard/newid/ansi
  • mshop/coupon/manager/standard/search/ansi
  • mshop/coupon/manager/standard/count/ansi

delete/mysql#

Deletes the items matched by the given IDs from the database

mshop/coupon/manager/standard/delete/mysql = 
 DELETE FROM "mshop_coupon"
 WHERE :cond AND siteid = ?
  • Default: DELETE FROM "mshop_coupon" WHERE :cond AND siteid = ?

See also:

  • mshop/coupon/manager/standard/delete/ansi

insert/ansi#

Inserts a new coupon record into the database table

mshop/coupon/manager/standard/insert/ansi = 
 INSERT INTO "mshop_coupon" ( :names
    "label", "provider", "config", "start", "end",
    "status", "mtime", "editor", "siteid", "ctime"
 ) VALUES ( :values
    ?, ?, ?, ?, ?, ?, ?, ?, ?, ?
 )
  • Default: mshop/coupon/manager/standard/insert
  • Type: string - SQL statement for inserting records
  • Since: 2014.03

Items with no ID yet (i.e. the ID is NULL) will be created in the database and the newly created ID retrieved afterwards using the "newid" SQL statement.

The SQL statement must be a string suitable for being used as prepared statement. It must include question marks for binding the values from the coupon item to the statement before they are sent to the database server. The number of question marks must be the same as the number of columns listed in the INSERT statement. The order of the columns must correspond to the order in the saveItems() method, so the correct values are bound to the columns.

The SQL statement should conform to the ANSI standard to be compatible with most relational database systems. This also includes using double quotes for table and column names.

See also:

  • mshop/coupon/manager/standard/update/ansi
  • mshop/coupon/manager/standard/newid/ansi
  • mshop/coupon/manager/standard/delete/ansi
  • mshop/coupon/manager/standard/search/ansi
  • mshop/coupon/manager/standard/count/ansi

insert/mysql#

Inserts a new coupon record into the database table

mshop/coupon/manager/standard/insert/mysql = 
 INSERT INTO "mshop_coupon" ( :names
    "label", "provider", "config", "start", "end",
    "status", "mtime", "editor", "siteid", "ctime"
 ) VALUES ( :values
    ?, ?, ?, ?, ?, ?, ?, ?, ?, ?
 )
  • Default: INSERT INTO "mshop_coupon" ( :names "label", "provider", "config", "start", "end", "status", "mtime", "editor", "siteid", "ctime" ) VALUES ( :values ?, ?, ?, ?, ?, ?, ?, ?, ?, ? )

See also:

  • mshop/coupon/manager/standard/insert/ansi

newid/ansi#

Retrieves the ID generated by the database when inserting a new record

mshop/coupon/manager/standard/newid/ansi = mshop/coupon/manager/standard/newid
  • Default: mshop/coupon/manager/standard/newid
  • Type: string - SQL statement for retrieving the last inserted record ID
  • Since: 2014.03

As soon as a new record is inserted into the database table, the database server generates a new and unique identifier for that record. This ID can be used for retrieving, updating and deleting that specific record from the table again.

For MySQL:

 SELECT LAST_INSERT_ID()
For PostgreSQL:
 SELECT currval('seq_mcou_id')
For SQL Server:
 SELECT SCOPE_IDENTITY()
For Oracle:
 SELECT "seq_mcou_id".CURRVAL FROM DUAL

There's no way to retrive the new ID by a SQL statements that fits for most database servers as they implement their own specific way.

See also:

  • mshop/coupon/manager/standard/insert/ansi
  • mshop/coupon/manager/standard/update/ansi
  • mshop/coupon/manager/standard/delete/ansi
  • mshop/coupon/manager/standard/search/ansi
  • mshop/coupon/manager/standard/count/ansi

newid/mysql#

Retrieves the ID generated by the database when inserting a new record

mshop/coupon/manager/standard/newid/mysql = SELECT LAST_INSERT_ID()
  • Default: mshop/coupon/manager/standard/newid

See also:

  • mshop/coupon/manager/standard/newid/ansi

search/ansi#

Retrieves the records matched by the given criteria in the database

mshop/coupon/manager/standard/search/ansi = 
 SELECT :columns
    mcou."id" AS "coupon.id", mcou."siteid" AS "coupon.siteid",
    mcou."label" AS "coupon.label", mcou."provider" AS "coupon.provider",
    mcou."start" AS "coupon.datestart", mcou."end" AS "coupon.dateend",
    mcou."config" AS "coupon.config", mcou."status" AS "coupon.status",
    mcou."mtime" AS "coupon.mtime", mcou."editor" AS "coupon.editor",
    mcou."ctime" AS "coupon.ctime"
 FROM "mshop_coupon" AS mcou
 :joins
 WHERE :cond
 GROUP BY :columns :group
    mcou."id", mcou."siteid", mcou."label", mcou."provider", mcou."start", mcou."end",
    mcou."config", mcou."status", mcou."mtime", mcou."editor", mcou."ctime"
 ORDER BY :order
 OFFSET :start ROWS FETCH NEXT :size ROWS ONLY
  • Default: mshop/coupon/manager/standard/search
  • Type: string - SQL statement for searching items
  • Since: 2014.03

Fetches the records matched by the given criteria from the coupon database. The records must be from one of the sites that are configured via the context item. If the current site is part of a tree of sites, the SELECT statement can retrieve all records from the current site and the complete sub-tree of sites.

As the records can normally be limited by criteria from sub-managers, their tables must be joined in the SQL context. This is done by using the "internaldeps" property from the definition of the ID column of the sub-managers. These internal dependencies specify the JOIN between the tables and the used columns for joining. The ":joins" placeholder is then replaced by the JOIN strings from the sub-managers.

To limit the records matched, conditions can be added to the given criteria object. It can contain comparisons like column names that must match specific values which can be combined by AND, OR or NOT operators. The resulting string of SQL conditions replaces the ":cond" placeholder before the statement is sent to the database server.

If the records that are retrieved should be ordered by one or more columns, the generated string of column / sort direction pairs replaces the ":order" placeholder. In case no ordering is required, the complete ORDER BY part including the "/-orderby/.../orderby-/" markers is removed to speed up retrieving the records. Columns of sub-managers can also be used for ordering the result set but then no index can be used.

The number of returned records can be limited and can start at any number between the begining and the end of the result set. For that the ":size" and ":start" placeholders are replaced by the corresponding values from the criteria object. The default values are 0 for the start and 100 for the size value.

The SQL statement should conform to the ANSI standard to be compatible with most relational database systems. This also includes using double quotes for table and column names.

See also:

  • mshop/coupon/manager/standard/insert/ansi
  • mshop/coupon/manager/standard/update/ansi
  • mshop/coupon/manager/standard/newid/ansi
  • mshop/coupon/manager/standard/delete/ansi
  • mshop/coupon/manager/standard/count/ansi

search/mysql#

Retrieves the records matched by the given criteria in the database

mshop/coupon/manager/standard/search/mysql = 
 SELECT :columns
    mcou."id" AS "coupon.id", mcou."siteid" AS "coupon.siteid",
    mcou."label" AS "coupon.label", mcou."provider" AS "coupon.provider",
    mcou."start" AS "coupon.datestart", mcou."end" AS "coupon.dateend",
    mcou."config" AS "coupon.config", mcou."status" AS "coupon.status",
    mcou."mtime" AS "coupon.mtime", mcou."editor" AS "coupon.editor",
    mcou."ctime" AS "coupon.ctime"
 FROM "mshop_coupon" AS mcou
 :joins
 WHERE :cond
 GROUP BY :group mcou."id"
 ORDER BY :order
 LIMIT :size OFFSET :start
  • Default: SELECT :columns mcou."id" AS "coupon.id", mcou."siteid" AS "coupon.siteid", mcou."label" AS "coupon.label", mcou."provider" AS "coupon.provider", mcou."start" AS "coupon.datestart", mcou."end" AS "coupon.dateend", mcou."config" AS "coupon.config", mcou."status" AS "coupon.status", mcou."mtime" AS "coupon.mtime", mcou."editor" AS "coupon.editor", mcou."ctime" AS "coupon.ctime" FROM "mshop_coupon" AS mcou :joins WHERE :cond GROUP BY :columns :group mcou."id", mcou."siteid", mcou."label", mcou."provider", mcou."start", mcou."end", mcou."config", mcou."status", mcou."mtime", mcou."editor", mcou."ctime" ORDER BY :order OFFSET :start ROWS FETCH NEXT :size ROWS ONLY

See also:

  • mshop/coupon/manager/standard/search/ansi

update/ansi#

Updates an existing coupon record in the database

mshop/coupon/manager/standard/update/ansi = 
 UPDATE "mshop_coupon"
 SET :names
    "label" = ?, "provider" = ?, "config" = ?, "start" = ?,
    "end" = ?, "status" = ?, "mtime" = ?, "editor" = ?
 WHERE "siteid" = ? AND "id" = ?
  • Default: mshop/coupon/manager/standard/update
  • Type: string - SQL statement for updating records
  • Since: 2014.03

Items which already have an ID (i.e. the ID is not NULL) will be updated in the database.

The SQL statement must be a string suitable for being used as prepared statement. It must include question marks for binding the values from the coupon item to the statement before they are sent to the database server. The order of the columns must correspond to the order in the saveItems() method, so the correct values are bound to the columns.

The SQL statement should conform to the ANSI standard to be compatible with most relational database systems. This also includes using double quotes for table and column names.

See also:

  • mshop/coupon/manager/standard/insert/ansi
  • mshop/coupon/manager/standard/newid/ansi
  • mshop/coupon/manager/standard/delete/ansi
  • mshop/coupon/manager/standard/search/ansi
  • mshop/coupon/manager/standard/count/ansi

update/mysql#

Updates an existing coupon record in the database

mshop/coupon/manager/standard/update/mysql = 
 UPDATE "mshop_coupon"
 SET :names
    "label" = ?, "provider" = ?, "config" = ?, "start" = ?,
    "end" = ?, "status" = ?, "mtime" = ?, "editor" = ?
 WHERE "siteid" = ? AND "id" = ?
  • Default: UPDATE "mshop_coupon" SET :names "label" = ?, "provider" = ?, "config" = ?, "start" = ?, "end" = ?, "status" = ?, "mtime" = ?, "editor" = ? WHERE "siteid" = ? AND "id" = ?

See also:

  • mshop/coupon/manager/standard/update/ansi

submanagers#

List of manager names that can be instantiated by the coupon manager

mshop/coupon/manager/submanagers = Array
(
    [0] => code
)
  • Default: Array
  • Type: array - List of sub-manager names
  • Since: 2014.03

Managers provide a generic interface to the underlying storage. Each manager has or can have sub-managers caring about particular aspects. Each of these sub-managers can be instantiated by its parent manager using the getSubManager() method.

The search keys from sub-managers can be normally used in the manager as well. It allows you to search for items of the manager using the search keys of the sub-managers to further limit the retrieved list of items.

Comments